1 kW Wireless Charging system
Main features:
- High-efficiency non-contact charging for industrial applications
- No wear and tear on parts
- Fully automated recharging
- Reduced weight on the vehicle
- Versatile recharging
Other features
- Charges any type of battery
- Each primary unit charges 24 V and 48 V automatically
- Control via CAN BUS
- Reliable and silent operation
- Compact on-board charging unit
- Intelligent communications
- Non-contact power transfer over a 20 mm space
- Efficiency equal to that of conventional wired chargers
safe and unattended 24/7 operation - No wear and tear on connectors
- No downtime for maintenance
|
AC Input |
||
|---|---|---|
| AC Input Rated Voltage |
100 to 240 Vac 1ph |
|
|
AC Input Voltage Range |
85 to 265 Vac |
|
|
AC Input Frequency |
50 / 60 Hz (47 to 63 Hz) |
|
|
Maximum AC Input Current |
12 A |
|
|
Power Factor (100% Load) |
> 0.95 |
|
|
Peak Efficiency (100% Load) |
92% (24 V version), 93% (48 V version) |
|
DC Output |
||
|---|---|---|
|
DC Output Nominal Voltage |
24 Vdc |
48 Vdc |
|
DC Output Voltage Range |
12 to 30 Vdc |
24 to 60 Vdc |
|
Maximum Charge Current |
41.7 A |
20.8 A |
|
Maximum Output Power |
1000 W |
|
|
Battery Type |
Lithium lon, Lead Acid (AGM / GEL) |
|
|
Output Protection |
Over voltage, over current, short circuit, reverse connection |
|
|
Parallel Operation |
Up to 4 chargers for a maximum of 4 kW |
|
Physical Positioning
Misalignment is the distance the pads are offset laterally and air gap is the distance between the pad faces as shown below.
At the charger system’s nominal output voltage, the full 1,000 W can be delivered in all combinations of gap and misalignment up to 20 mm.
However, when the output voltage is above nominal value the gap and misalignment does have an impact on the amount of power that can be delivered, with the worst case being at the charger system’s maximum working voltage, and is shown in the following table:
|
Air gap |
Max. misalignment for 1000 W |
|---|---|
|
0 – 6 mm |
20 mm |
|
8 mm |
18 mm |
|
10 mm |
17 mm |
|
12 mm |
16 mm |
|
14 mm |
15 mm |
|
16 mm |
10 mm |
|
18 – 20 mm |
5 mm |
Size (H x W x D):
Primary Box 192 x 280 x 60 mm (7.6 x 11.0 x 2.4 in)
Primary Pad and Onboard Pad Ø 160 x 19 mm (6.3 x 0.7 in)
Onboard Charging Unit 168 x 82 x 28 mm (6.6 x 3.2 x 1.1 in)
Weight:
Primary Box and Pad 5.4 kg (11.9 lb)
Onboard Charging Unit and Pad 1.5 kg (3.3 lb)